Correct Braking

Correct braking is the key to safety on the road. From childhood, we are taught that a busy road is an object of increased danger, and a lot of unpredictable situations can happen on it, for the resolution of which not only sufficient driving experience, but also an instant reaction is required. (Automatic Driving Lessons Coventry) And in most cases, emergency situations require either a quick change in direction of travel, or sudden braking. And as it is not difficult to guess, it is the timely reaction of the motorist that can save him and the passengers of the car from a possible accident. Therefore, skillful and timely braking also requires training.

There are special braking techniques that, unfortunately, many drivers do not even know about. Different methods of braking should be used depending on external factors: weather conditions, road surface, distance to an object in the path.

There are such methods of braking as:

·         Intensive method.

·         Combined method.

·         Step method.

Intense braking

This method of braking is most effective when the car has already reached a sufficiently high speed (100 km / h and above). The essence of intensive braking: a sharp squeezing of the brake pedal and then holding it until the moment the car starts to slide along the road. At this point, you should take your foot off the pedal to regain traction, and then depress the brake pedal sharply again.

But the use of such a method on roads with poor coverage will definitely be a mistake and can lead to disastrous results. This method of intensive braking is advisable if the car is driving on a road with a perfectly flat surface, and the further section of the track is straight. Naturally, in order to master this method perfectly, you need skill and sufficient experience. Therefore, you should still practice first. (Automatic Driving Lessons Birmingham) After several such workouts, you begin to clearly feel exactly the moment when you should release the brake pedal so that the car regains stability and can finally stop. Having mastered this technique, it is quite easy and quick to react in a situation where an immediate stop of the vehicle is required.

If the car is equipped with an ABS (anti-lock braking system) system, then using the intensive braking technique, it is not necessary to remove your foot from the brake. It is enough just to squeeze the brake pedal to the limit, and the automation itself will control the start of sliding. At this moment, a strong vibration of the pedal will be felt and the driver will undoubtedly feel it.

Combined braking

Combined braking is carried out not only by the braking system, but also by the engine. This method is quite effective, as it is suitable for roads with any surface. The only condition is a sufficient distance between the vehicle and a possible obstacle.

Such a braking system consists in the fact that pressing the brake pedal should not be sharp, but rather smooth. Simultaneously with pressing, you should gradually change gears, lowering them. As a result of this method, the braking distance is significantly reduced.

Step braking:

This method is the simplest and does not require extensive experience and skill from the driver. The idea is to repeatedly depress the brake pedal. The pressing force in this case can be completely different. (Automatic driving lessons Birmingham ladies) Basically, this method is used for a long descent of the car at one or different angles. As a result of this technique, brake pads and discs are not exposed to excessive heat, which prolongs their service life. By mastering the above methods of braking, you can cope with many of the troubles that arise on the roads.